Cross-platform band metronome
One beat
for the whole band
The host opens a room and everyone joins by QR. iPhone, Android or iPad, every device clicks on the same beat. Sheets, chords and play-along practice live in the same app.
Starting a session
The host creates a room
Tap Band → Create Room and just name it to get an invite QR. Have a team? Tap Start Ensemble on the team screen instead.
Members join by QR or notification
Scan it with Band → Join by QR, or tap the team session notification, and you're in the same room.
In on the next downbeat
Join mid-song and you come in right on the beat.
Band
A band that locks in without a word
Start, cues and sheet position all come from the host, and every member's screen follows.
The host opens a room and everyone joins by QR. Many devices click as one, and late joiners come in on the next bar's first beat.
Start the metronome on iPhone and your Apple Watch taps your wrist on the same beat. The watch measures its clock offset to the iPhone, schedules every beat itself and counts 3·2·1·GO with you. Tap the bars for downbeat ↔ beats 1·3, tap the BPM to mute. Lower your wrist and the haptics keep going. Remote control (crown BPM, play, previous/next song) is Premium.
Bluetooth earbuds sound late, so the click trails the screen and your band. Tap Calibrate at the top of Sound Source and hold one earbud to the mic at the bottom of your phone — it listens to 8 clicks and calibrates itself. Those earbuds then play the click just early enough to land with the screen and your bandmates' devices, and recording analysis places the beats with the same value. Saved per pair; wired earphones calibrate the same way, and the phone speaker can be adjusted by hand. YouTube sync set on the speaker no longer drags over Bluetooth.
The host taps ONE MORE, CHORUS, BRIDGE and more. Every member gets a big cue card on screen, plus a voice call and a buzz. The click never misses a beat.
Tap the timer and get your instrument ready during the countdown. Come in on beat one, solo or with the band.
When the host taps a bar, every member's sheet turns to that page and marks the same bar. Different edition? It finds the spot by the chords.
See who's late, by name, with a blinking dot. The host removes them and starts with everyone who's ready. Removed members can jump back in within 10 minutes.
Pick the songs in order on a team event and set the key for each one. Change a key and everyone is notified; Going · Maybe · Can't go at a glance. Tap Play this setlist together and the whole team is notified, with the song order straight from the setlist. Missed it? Join from the team screen, no QR needed. All your teams, one calendar.
Sheets & chords
Sheets that turn with the beat
Your score sits next to the metronome, marks the current bar, and turns written chords into guitar, bass or ukulele fingerings.
Upload the sheet (PDF or photos) at the top of Save Beat and page 1 is read for title, artist and BPM, filling only blank fields. What you typed stays; anything not printed stays empty. Then answer "Read the chords now?" and the song is saved and chord reading starts. Your sheet sits next to the metronome, and you can write right on it.
While you play, the chords read from your sheet show as guitar shapes (or staff) in equal-size boxes. Only one box moves on to the next chord and the one you just played stays, so you won't lose it if you fall behind. A hold bar under the current chord fills with the beat, showing how long to hold.
Tap Instrument in the chord panel and pick Guitar, Bass, Ukulele or Staff: the chord boxes, chord sheet and fingering picker all switch to it. Bass shows box positions with a red dot on the note to play; ukulele gets real G C E A shapes. The chord sheet shows only your instrument in equal-width boxes, and each device remembers its own pick.
On a tablet, tap Score and pick 'Sheet + big chords': the current chord's shape sits large to the right of the sheet in landscape, and below it in portrait. Rotate mid-song and it follows. Set Instrument → Chord boxes to Fixed and the chord to play stays in one spot while the next ones slide in one box at a time.
Tap a chord to see every fingering. Pick one and the rest adapt for less hand travel, synced to your other devices.
Tap Barre in the chord panel: the chords stay as written on your sheet, and the fingerings switch to barre shapes with no open strings. E-shape (root on the 6th string) or A-shape (root on the 5th), picked to keep hand travel small across the song.
On a song whose chords were read, tap Key above your sheet and pick a new key. The chord chart, guitar fingerings and the chords on your sheet all switch together. In a team session the host's change reaches everyone, and you can also swap any single chord.
On Check chords & sheet, long-press a chord to drag it. It snaps in ¼-beat steps while a magnifier above your finger shows the staff your hand hides and the spot in words, like "Bar 3 · beat 2¾". Edits are kept on your phone right away and synced when you save.
Repeat signs, 1st/2nd endings, D.S. and Coda are read and followed in playing order. Want a section more times? Set ×N. Mismatched marks are flagged right away.
Tap Bars on Check chords & sheet to drag bar lines onto the sheet, and hold a bar to split, merge, delete or change its meter. Save, and the song structure is built in play order so the metronome follows. The play-through preview runs repeats, segno and coda at up to 8×.
The current bar is marked and the page turns just before the next page's first bar. When the sheet ends, the click stops too.
Sync a YouTube track once to a sheet you've run Read Chords on, and the sheet follows the video's position whenever it plays. Start halfway, rewind 10 s or drag the progress bar: it jumps to that bar and turns the page if needed. Repeats follow the playing order, and slower speeds still land on the same bar. (Not for Song Structure or Practice Mode songs.)
Pair a page-turner pedal in your device's Bluetooth settings and open a sheet. Right flips forward and left flips back, even while the click plays, and two-page view on a tablet turns two at a time.
Practice
Solo practice, done precisely
Lock to the track, split the beat, record, and check it in numbers.
Tap the downbeat four times along with the song (in 4/4, on beat one of each bar), and the click starts with the track on the very next downbeat. Then the app listens and fine-tunes BPM and timing. No BPM? No problem.
Play an 86.7 BPM song at 86 and you're over half a beat off after a minute. Set BPM to two decimals, in tap tempo and song sections too.
In a song whose sections have different BPMs, change the BPM once and every section follows at the same ratio as section 1. Enter 90 on a 120 · 108 · 132 song and you get 90 · 81 · 99. Got it down? Enter 120 again and every section returns to its exact original tempo. Number pad, Tempo Pad, tap tempo, YouTube speed or Apple Watch: all scale together.
Split each beat into 2, 3, 4 or 6, and set accent, soft or rest per beat. Mute the downbeat and click only the off-beats.
Set how many bars and how many BPM, and the tempo climbs step by step up to your max.
Each song keeps its BPM, meter and sheet. Drag to set the order, tap next, and tempo and sheet switch together.
Record with the click and listen back right away. It keeps recording while YouTube or your music app plays.
See how many ms early or late each beat was, plus your on-beat score, % within ±15ms, and the BPM you played.
In My Recordings, tap View analysis on a timing take and press play: the note you hear stays at the center under a white line. See how many ms early or late each beat is as you listen, and resume right where you paused. On iPad the graph sits beside the list.
Tap Analyze on the rec bar, pick the Pitch tab and sing along with the click: your pitch is drawn as a line the moment you sing. With sheet chords, notes that hit a tone of the chord playing now (root, 3rd, 5th, 7th) turn green; off notes get a grey outline. Even while you rest, the graph keeps rolling on the beat. Timing is for instruments, Pitch is for vocals.
Sing in the Pitch tab, stop, and your report appears right there. No vague total, just two numbers: pitch (notes within ±25¢) and timing (notes within ±50 ms), plus how many were flat or sharp. 'To work on' names the exact bars, and one tap sets up your next practice: 8th-note clicks or −10 BPM. Vibrato isn't penalized. Try 5 reports, then it's Premium; the graph is always free.
Tap any beat on the timing graph for a bubble like '+34 ms late · Bar 3, beat 1', then Listen from this beat. Below the score, your tempo drift and what to work on, in plain words. Analyze from the sheet and every bar gets beat cells (red = early, blue = late) plus a gold dot where your singing drifted off pitch; tap a bar to play or loop just that bar. (Sheet results need Read Chords.)
Pluck a string and a live pitch graph shows flat or sharp. Green in the middle means you're in tune.
Solo, band and YouTube practice all count toward one worldwide board of the last 7 days.
Go to My Page → Theme and tap a color: the background, beat bars and play button switch to it instantly. 11 colors plus 8 fun themes like Neon, Punk and Jazz, 19 in all. Signed in, your other devices match.
Tap the note button left of Play to open Sound Source: 7 clicks plus 12 percussion, drum and tonal sounds, each with its own strong and weak beat. Switch while playing and the new sound starts on the next beat. In team play everyone hears the sound they picked. All free.
From musicians who use it
Even better than the intro image! The synchronization works perfectly.
Just as I expected. Perfect for our band and the sync is flawless. Perfect and simple.
I needed this for my performance! Thank you so much!
This is the app I wanted.
It's still an early version, but an app like this should be hugely successful.
Exactly what I was looking for! I love that it supports lyrics too.
Translated from app store reviews.
Frequently asked questions
Do iPhone, Android and iPad really click on the same beat?
Yes. The host opens a room and members join by QR, then every device plays the click against the same reference time. Different devices and operating systems still share one beat, and anyone who joins mid-song comes in on the next bar's first beat.
Do bandmates need the app? Do they have to sign in?
Bandmates just need the same free app. Scanning the host's room QR with the camera puts them in the room, no sign-in needed.
Does it need an internet connection?
Band sessions (Team Sync) use the internet to share the room and line up each device's clock. Wi-Fi or mobile data both work.
Is it free?
It's free to download and use. Some features are unlimited with Premium.
What if one member is late or drops off?
When the host presses play, the app checks that everyone is ready and starts together. Late members show by name with a blinking dot, and the host can remove them to start right away with the rest. Removed members can jump back in within 10 minutes.
Can the metronome follow a YouTube song?
Yes. With YouTube auto sync, tap the downbeat four times along with the song (in 4/4, on beat one of each bar) and the metronome starts with the song from the next bar's first beat, then listens to fine-tune the BPM and position. You don't need to know the BPM.
My song is 86.7 BPM, not a whole number.
You can set BPM to two decimal places. Playing an 86.7 BPM song at 86 drifts more than half a beat in a minute; with decimal BPM you practice at the original tempo.
Which devices and languages are supported?
iPhone and iPad (App Store) and Android devices (Google Play), plus Apple Watch paired with an iPhone for the beat as wrist taps. The app is available in 13 languages.
Who makes Connect Metronome?
CHORD on CODE (코드온코드), an app studio in South Korea. Reach us at admin@chordoncode.com.
Start your next rehearsal
on one beat
Free to download. Your bandmates just need the same app.
Some features are unlimited with Premium.


